BEIER-Electronic

noProduktnummer: SFR-1 Uten/DVD

Sound Speed Controller SFR-1

Klikk for å se større versjon

Sound Speed Controller SFR-1

Stock: Ikke på lager Utsolgt
  • Veil. pris: kr 3.524,00
  • Nå kun: kr 3.315,00
Supply voltage (Ub):6 – 18 V DC
Power consumption:Quiescent current: approx. 1 mA
Standby current (sound, motor and outputs off): approx. 80 mA
Motor current:max. 30 A continuous current, 60 A short time (1 minute)
BEC voltage:5,6 V
BEC current:max. 3 A continuous current, 5 A short time (10 seconds)
Proportional inputs:6 channels (1,000 - 2,000 ms)
Supported protocols:
  • PPM / PCM (1,000 - 2,000 ms)
  • Sum signal S-Bus (max. 16 channels)
  • Sum signal SUMD (max. 16 channels)
  • Nautic / Multiswitch / Multikanal / EMS
Servo outputs:3 outputs (1,000 - 2,000 ms)
  • Servo output for steering
  • Servo output 1
  • Servo output 2
Switching outputs:16 outputs (npn – open collector), max. 1,5 A per output, the total current of all outputs is not allowed to exceed 3,0A
NF amplifier:20 W
Loudspeaker:4 - 8 Ohm
Volume setting:With extra poti (100 kOhm) and/or by the radio
Memory for sound files:Micro-SD-card (1 to 64 GB)
May. length of sound:approx. 180 minutes per 1 GB
Supported sound files:WAV-format, 8/16 Bit, Mono/Stereo, 22/44 kHz
Sound output:16 Bit, Mono, 44 kHz
Number of possible sounds:
  • 5 running steps/gears (internally in up to 255 steps accelerated)
  • 8 change sounds between the running steps/gears
  • Turn on noise, turn off noise, starting noise, stopping noise, idling noise, brake noise, reverse engine noise, curve squeal, flashing lights sound
  • 30 additional sounds (for example via prop.-channels)
  • 8 random sounds (random generator)
  • 30 tracks for WAV-Player
Random sound generator:Times between 1 to 999s adjustable
Additional ports:
  • Programming interface for data cable
  • Port for infrared diode of light module SM-IR-16-2
Protection features:
  • Short circuit protection at motor output stage
  • Short circuit protection at switching outputs
  • Short circuit protection at BEC
  • Temperature monitoring
  • Battery voltage monitoring
  • Protection while switching on power supply
  • Failsafe for proportional inputs
Cables for connection:
  • For battery: 2 x 1,5 mm², length approx. 15 cm (with Deans T female connector)
  • For Motor: 2 x 1,5 mm², length approx. 15 cm
  • For receiver: servo patch 3 x 0,14 mm², length approx. 30 cm
Permissible ambient temperature:0 – 60° C
Permissible relative air humidity:Max. 85 %
Size:81 x 49 x 23 mm (with SD card: 81 x 52 x 23 mm)
Weight:86 g